Digital satellite receiver install

Here are the lists of compulsory tools needed for the installation of satellite tv dish as follows:. Let me proceed by explaining the stated components above so that the tutorial will be of benefits to our reader most especially layman. Satellite tv dish is a parabolic surface usually in round form and the main function of dish to receive the transmitted signal by the satellite tv service provider such as directv or dstv and satellite tv dish usually connected to the satellite tv receiver through coaxial cable and typical example of satellite tv dish as shown below.

A digital satellite tv receiver is a device used to receive signal from the satellite tv dish connected through coaxial cable, the signal can be encrypt by the service provider to prevent unauthorized view and available as free-to-air service channels to their viewers and example of satellite tv receiver as shown below.

This is a cord or a wire connected to the LNB on a satellite tv dish to the receiver and it is usually in black or white color. Example of coaxial cable shown below. F-Connector have a nut head painted with silver and the function of F-Connector gripped the wire firmly and tied the nut to the LNB or receiver as shown below:. Note: Selecting dish location is crucial to make dish installation easier you need to choose a place very close to signal location and the dish needs to be free from obstacles such as house, trees and so on.

This is the best way to learn how to install satellite tv dish and receiver and if you face any difficulty during the installation of dish feel free to leave comment below or use our site contact form to reach and usually response take less than 24hours and If you like this tutorial please share it with your friends, family and also share across social media thanks and see you in the next episode. Hi iam having difficulties in getting the mbc channels that is mbc 1,2,3 max and action which is the exact position?

What i know is near dstv position.. Alternatively point your satellite dish to Eutelsat 7A At 7E. I mistakenly press a button on my digicom channels receiver and all the channels are gone, pls how will I restore them?

Press menu 2. Navigate to Satellite installation 3. Select your satellite's name from the drop-down box on the right side of the page. Click Search! Make sure that there is a green line indicating line-of-sight for your satellite. If this line is red, the satellite won't work properly in your area. Note the network's bearings. In the pop-up box on the map, look at both the "Elevation" number and the "Azimuth true " number.

You'll use these numbers in degrees to adjust your dish later. Ensure that you have the proper hardware. You'll need the following equipment before you can actually install the satellite dish: [1] X Research source Satellite dish — Used to receive the satellite's signal.

You'll need an 8-foot dish for C-band channels or a inch dish for KU-band channels. Satellite receiver — Used to receive the satellite dish's input and translate it into channels for your TV. Satellite tuner — Used to fine-tune the satellite dish's position. Coaxial cable — Usually packaged with the satellite dish, but you may need to buy a longer or shorter cable depending on your satellite dish's location.

Determine your satellite dish's optimal position. You'll want to aim your satellite dish at the satellite itself, so find a high location e. You'll also need to ensure that your satellite dish isn't obstructed by trees, buildings, or other obstacles. Figure out the best route from your dish to your TV. Since you'll need to run a coaxial cable from the dish to the receiver inside your house, you'll want to find a path that minimizes the cable's exposure to the elements while keeping the cable as short as possible.

Many dish users route the cable along the side of the house and through a wall where necessary, but your cable setup may vary. If necessary, buy a new coaxial cable that will reach your dish from the receiver before proceeding. Part 2. Secure the dish in your selected position. Place the dish 's mast and dish itself on a stable surface, then lock down its position using the included bolts or fasteners. It's incredibly important to make sure that the dish is secured as tightly as possible so that it doesn't become loose during a windstorm.

If the dish is mounted on a wood roof, you can caulk around the base to make it waterproof. Using the "Elevation" and "Azimuth" numbers as guides, angle your satellite dish toward the satellite that you want to use.

This will ensure that the dish is roughly positioned toward the satellite. You'll most likely need a compass for this step. Connect the satellite tuner. Using the 6 foot 1. Use the satellite tuner to fine-tune your dish's horizontal axis. Turn on the satellite finder, input the satellite name or select it from a list, and enter the satellite's frequency. You should hear a continuous beeping sound which will allow you to corroborate your dish's position: Rotate the dish left or right.

Listen for quicker beeping to ensure that you're rotating the dish in the correct direction. Rotate the dish the other way if the spaces between beeps get longer.

Secure your dish's horizontal axis. Tighten the rotation control screw completely to fix this angle. Adjust the vertical axis. You'll do this in the same way as you adjusted the horizontal axis; once the beeping is as quick as you can manage to achieve, you can tighten the vertical axis screw. Connect your satellite dish to your receiver. You'll use the long coaxial cable for this step.

The coaxial cable should plug into the back of the satellite dish's receiver. You can use a staple gun to staple the coaxial cable to your house's siding in order to prevent it from hanging freely. Depending on your house's layout, you may need to drill a hole in the wall in order to thread your coaxial cable through to the receiver.

If so, make sure not to drill through any pipes or wires. Part 3. Plug the receiver into both a power source and your TV. You'll also need to use the receiver's power cable to connect to an electrical outlet. Turn on the receiver if necessary. If so, flip the switch to the "On" position before proceeding. Switch to the receiver's channel. Allow the receiver to perform its installation if necessary. Often, before the fine tuning is done, the satellite dish will be connected to the actual satellite receiver unit that will be placed inside the home.

The receiver is then connected to the television. This is done through a coaxial cable or, for high definition service, an HDMI cable. The best indication that the proper spot has been found is when a signal is detected on the television set. Once the satellite receiver is set up, the next step will usually involve calling customer service for the satellite company.

The agent on the other end will help set up the initial account and provide you with a programming package of your choice. It should be noted that many times an initial programming package will be an introductory offer that shows what the service can provide, but is also deeply discounted. In order not to get stuck with a big bill, new users should remember to opt for a less expensive package after that introductory period, if that is what they desire to do.