How to program a keyless entry remote for a chevy

Once you program the transmitter, all previous codes will be erased from the memory if not reprogrammed during the same programming procedure. The other transmitters will not be functional until you program the transmitters again with new remote.

Close all vehicle doors. Insert the key into the ignition. Perform steps 5 through 8 in fairly rapid succession. Turn the ignition switch to the ON position as far as you can go without starting the engine. Turn the ignition switch to the OFF position. Turn the ignition switch to the ON position. Release the power unlock butto n on the door panel. The vehicle will lock and unlock the doors automatically to confirm remote programing or learning mode. Let go of the "Unlock" button.

At this point, the door locks will cycle automatically. Press and hold the "Unlock" and "Lock" buttons on the remote you are programming.

Hold them until the door locks cycle again. After accidentally stumbling into a journalism class at University of North Texas, Abby Vaun has been writing ever since. From Dallas to New York to L. Step 1 Sit in the driver's seat and close the door. Step 2 Put the key in the ignition.

Step 3 Push and hold the "Unlock" button on the driver's side door. Step 4 Turn the key to the "On" position and then back to the "Off" position. Step 5 Let go of the "Unlock" button.